To acquire the best effect in small or medium spaces, with a minimum height of 5 meters between the ceiling and floor, the use of "106EC" cannons is recommended. This cannon fires confetti at an approximate height of 4/5 meters.
It is recommended to fire the confetti vertically with the "106EC" cannon allowing it to rise higher, taking more time to fall. The cannon can also be oriented diagonally to direct the confetti towards the public.
These confetti cannons are designed to be used with electric machines that give the voltage necessary for a correct launching. These cannons are not for autonomous use, opposed to manual cannons.
The "106EC" cannon is composed by two different parts:
- The superior part where the confetti is charged
- The inferior part with the compressed air tank which will launch the confetti
The electric signal of the confetti and/or streamer machine is to remain turned off for the placement of the "106EC" cannon.
Insert the cannon in the hole of the confetti machine, allowing for support and the graduation of the inclination. Remove the plastic cap or break the tissue paper protection used so the confetti does not fall throughout the transport.
Connect the plug from the cable of the "106EC" cannon to the electric machine's entrance.
Depending on the type of machine used, the control remote or the electric button will be used to activate the "106EC" cannon and fire the confetti.
The "106EC" cannon will never be used with the confetti firing exit focused directly towards a person or their face. We will make sure that the confetti/streamer firing exit is not blocked by any object or person
Do not pierce this cannon. It contains a tank with pressured gas. Do not store close to a heat source or directly exposed to the sun.